Lift Hawk
The Lift HAWK is a lift sensor fitted on the top of the lift car (TOC) which can remotely check the lift status through connection with a Digital Communication Platform (DCP) or Memcom+. Information such as the time of the last lift movement, current door status and time of the last door move can all be remotely tested using this device. The HAWK also self-learns the typical activity of a lift and can autonomously perform lift tests in periods of prolonged inactivity.
A common issue for lift engineers is being called out to site to check an ‘out of service’ lift, however, the lift is ‘running on arrival’. This is clearly time consuming, costly and frustrating for the lift engineers. The HAWK means that maintenance companies can quickly and easily check to see if the lift is genuinely ‘out of service’ from a remote location. By using the Avire Hub cloud platform, you can initiate simple tests to check the door status and to move the lift. The results are reported back and presented on the Avire Hub.
Autonomous testing means that the Lift HAWK will find and report issues with your lift before you even know there is a problem. Lift HAWK is quick and easy to install and promises to offer you a significant reduction in false call outs for your lift engineers.
Key features:
- Remotely test the lift status without having to connect to the lift controller
- Self-learning sensor performs autonomous tests when usage patterns are not typical
- Set-up tests at scheduled intervals
- Real-time monitoring through the Avire Hub
- Saves time and cost of visiting site for false call outs
- 4-wire connection to DCP
- CAN or serial connections
- Compact mechanical footprint
- Quick and easy to install
Connex-02
The Connex-02 is an MK-CANBus enabled module that, in conjunction with a Digital Communication Platform (DCP), provides remote lift monitoring and control through the Avire Hub.
The Connex-02 has inputs and outputs that are fully configurable through the Avire Hub. Each input has different monitoring modes to choose from, including if the lift is in or out of service, showing when the lift is in maintenance mode, logging engineer arrival and departure and monitoring of the door open and close cycles.
In addition, the Connex-02 allows a fully configurable Event Monitoring mode where the user can connect any device and enter the name of the event on the Avire Hub which will be visible in the events log.
Connex is a small form factor DIN rail mounted device, that can be easily mounted in a motor room/MRL cabinet, top of car, or behind COP. A maximum of two devices can be installed per lift shaft allowing connectivity in both lift car and motor room.
Key features:
- User defined inputs and outputs
- Real-time remote lift monitoring and control through the Avire Hub
- Log engineer arrival and departure time
- Perform remote lift soft reset
- Opto-isolated inputs and outputs.
- DIN Rail Mounted
- Compact mechanical footprint
- Quick and easy to install
- Monitoring of lift out of service, maintenance mode, door cycle count and engineer on site
