Micelect Beam Sensors

The VG Beam & Mini Beam sensors provide an accurate and reliable solution for controlling the load in all types of lifts. The VG beam sensor takes weight measurements through the deflection of the crosshead beam on which it is mounted.


This solution is particularly recommended for large elevator cabins and freight lifts due to the fact that it has unlimited capacity. This solution can be used both for new installations and modernizations.


Key Features:


  • Accurate and reliable solution for controlling the load in all types of lifts
  • Unlimited capacity
Download Micelect Beam Sensor Datasheet

Micelect Bedframe CCP Sensor

The CCP sensor provides an alternative solution for controlling the load in installations where it is not possible to install other devices.
The fact that this device can be used with all types of roping 1:1, 2:1 & 4:, make it a good alternative solution in complicated installations.


Two different versions CCP-2000 and CCP-4000 for 2000Kg and 4000Kg loads.


Key Features:


  • Calibration with test weights
  • High capacity
Download CCP Sensor Datasheet

CAB - Load Weighing Sensor

CAB load weighing system provides the most precise solution for controlling the weight in any type of lift.


The reliability of this solution means it is recommended for any installation in which it is necessary to control the load with a high level of accuracy, such as installations which require the detection of “presence” inside the cabin.


This solution is recommended for any new installation, or installations in which a high level of accuracy and reliability is required.


Two different versions CAB-800 and CAB-200 for 800Kg and 200Kg loads.


Key Features:


  • Unparalleled accuracy and reliability
  • No need for maintenance
  • Automatic calibration, meaning no need for test weights
  • Total accurate

Micelect Hitch Plate Sensor

The HPS individual wire rope sensor provides an easy and precise solution for controlling the load in traction lifts by measuring the individual tension on each wire rope.


When used with the MWR-4 or MWR-8 control unit, it becomes the perfect solution for installations where it is necessary to monitor the balance of the rope tensions, or where there is extremely limited headroom.


Another option with LM3D box control and USB-BOX the total weight sum of all the cables will be obtained.

This solution is recommended for any new installation, or installations in which a high level of accuracy and reliability is required.


Key Features:


  • Unparalleled accuracy and reliability
  • No need for maintenance
  • Automatic calibration, meaning no need for test weights
  • Reduced dimensions
  • For any type of wire ropes and flat belts
  • Quick and easy installation

Micelect Rope Mounted Sensors

Micelect rope mounted sensors provide an easy and precise way to measure the load in traction lifts. Theses sensors are easily installed on a multitude of roping ratios and can be calibrated using the auto-calibration method using the diameter of the ropes. They are the perfect solution for lift modernisations.


Key Features:

  • Easy and precise way to measure the load in traction lifts
  • Easily installed on a multitude of roping ratios
  • Calibrated using the auto-calibration method using the diameter of the ropes
  • Perfect solution for lift modernisations


Available options:

  • ILC2: 2x programmable alarms: Full load & Overload
  • ILC3: 3x programmable alarms: Presence, Full load & Overload
  • ILC-CANopen: The unit uses CANopen® communications protocol and its calibration and configuration are very easy
  • LMC: The LMC wire rope sensor provides an easy and precise solution for controlling the load in traction lifts with all types of roping (1:1, 2:1 & 4:1)
  • WR: The WR individual wire rope sensor provides an easy and precise solution for controlling the load in traction lifts

Hydraulic Load Sensor

The SPB electronic pressure sensor provides an easy and precise solution for controlling the load in hydraulic lifts. Its quick and easy installation and automatic calibration (5 mins.) make it the perfect solution for both new installations and modernisations.


Key Features:


  • Automatic calibration, meaning no need for test weights
  • Quick and easy installation (5 mins.)
  • 2 programmable alarms: Full load and Overload
  • Integrated display to show weight values in bars
  • EEPROM data memory

Micelect Portable Rope Tensioning System

The Micelect RTS device is a precision tool for accurately balancing the tension in a lifts wire ropes. It’s high level of precision and ease of use make it an essential tool for installers and maintenance workers alike.


Key features:


  • Precision tool for accurately balancing the tension in a lifts wire ropes
  • High level of precision
  • Easy to use
Download RTS Datasheet

Micelect LM3D Universal Load Weighing Controller

The LM3D universal control unit is the most complete control unit which has all the possible options available to control the load in elevators and lifts.


This control unit can be used with any load weighing sensor manufactured by MICELECT.


Models available:

  • DIN Rail
  • IP-65 rated plastic box

Key Features:

  • 3 Relays
  • Integrated software to correct weight increases due to compensating chain
  • Cabin indicator output

Micelect LMCAB Load Weighing Controller

The LMCAB control unit is specifically designed for use with the CAB load weighing sensors.


Models available:

  • DIN rail
  • IP-65 rated plastic box

Standard features

  • 2 relays
  • Cabin indicator output
  • Suitable for 8 sensors

Options:

  • Reinforced version for use with more than 8 sensors
  • 24VDC

Micelect MWR-4 Load Weighing Controller

The MWR-4 control unit is specifically designed for use with the WR load weighing sensors. Up to 4 separate readings can be viewed at the same time, as well as the total for all 4. 


Models available:

  • DIN rail
  • IP-65 rated plastic box

Standard features

  • 3 relays
  • Integrated software to correct weight increases due to compensating chain
  • Cabin indicator output
  • Suitable for four sensors

Options:

  • Analogue output in mA (0-20, 0-24, 4-20)

Micelect MWR-8 Load Weighing Controller

The MWR-8 control unit is specifically designed for use with individual WR load weighing sensors equipped with USB connectors. 


Models available:

  • DIN rail
  • IP-65 rated plastic box

Standard features

  • 3 relays
  • Integrated software to correct weight increases due to compensating chain
  • Integrated software to control with an alarm if the tension balance between the ropes becomes unbalanced
  • Cabin indicator output
  • Suitable for eight sensors

Micelect LM-CANopen® Load Weighing Controller

The universal LM-CANopen control unit can be used with all load weighing sensors manufactured by MICELECT.



This unit uses CANopen® communications protocol and its calibration and configuration are very easy. 


Models available:

  • DIN rail
  • IP-65 rated plastic box

Standard features

  • CANopen® communications
  • Compatible with all sensors manufactured by MICELECT
  • Open Style connector according to DS 303-1
  • LEDs indicating the status of the node according to DS 303-3

Micelect LM-CANopen® Load Weighing Controller

The new universal LM-CANopen control with display unit can be used with all sensors manufactured by MICELECT.

This unit uses CANopen® communications protocol and its calibration and configuration is very easy.
8 to 16 inputs models available.



Models available:

  • DIN rail
  • IP-65 rated plastic box
  • 8 Inputs
  • 16 Inputs
  • CAN Proprietary protocol
  • Alternative versions with CAN proprietary protocol

Standard features

  • CANopen® communications according to Cia 417
  • Compatible with all load weighing sensors manufactured by MICELECT
  • Up to 16 individual sensor measures.
  • High sampling speed
  • Non-connection sensor detection (EMCY codes)
  • CAN-bus connection: DS 303-1 (Open Style Connector or 9-pin D-sub connector)
  • LEDs indicate the status of the node according to DS 303-3
  • CANopen alarms:
  • Zero-Load
  • Normal-Load
  • Full-Load
  • Overload
  • Slack rope
  • Difference of rope
  • LCD and buttons to view and set all CANopen and manufacturer parameters
  • Update firmware button through CANBus connector (with PCAN adapter)

OEM Load Weighing Spares

Whitesmith Solutions supply a comprehensive range of OEM spare parts to support all manufacturer types.


  • Lift load weighing sensors
  • Lift load weighing controllers
  • Printed circuit boards
  • OEM load weighing assemblies
  • Load weighing modules
  • Cabin indicators
  • Power supplies