Maintenance Prop - Folding
The folding maintenance support is ideal for creating a temporary protected space in the pit. During normal operation the support lies on the floor. With a height of only 140mm it can be mounted in very small pits.
When entering the pit for maintenance or other works, the support has to be folded up. The support automatically locks into place when it reaches a vertical position. To fold it again, the locking bolt has to be released.
Both positions of the maintenance support are monitored by a safety switch with forced disconnection. The length of the support can be adjusted. Optionally a lift buffer can be mounted. When the car rests on its fully compressed buffers, one size of the following safety spaces (per person) must be available, according to EN 81-20 5.2.5.8.1
Key Features:
- Size 1: 500-770mm (vertical) x 630-900mm (horizontal)
- Size 2: 700-1000mm (vertical) x 820-1150mm (horizontal)
- The length of the support is adjustable
- Maximum static load: 2000kg
- Maximum velocity: 1 m/s
- IP67 safety switch
- Colour: Signal orange
- Includes fixing screws and instruction manual
Lift Pit Prop - Fixed
Key Features:
- Available in 2.5m or 3.0m
- Supplied complete with fixed yellow pit prop, floor socket, safety switch and wall storage bracket
- Safe working load (SWL): 3000kg
- Pit prop car locator and non standard lengths are available to order
